Archive for November, 2016

Top 10 Things to Consider for a Perfect Floor Tile Project

1. Choosing your floor tiles

Whether you choose a patterned or a neutral floor tiles think about how your tiles will coordinate with the room colours and scheme. Natural stone tiles such as slate or granite work with many different styles.

But why not go for something unique such as digitally printed tiled mural or your own bespoke pattern tile design?

A particularly unique floor tile design was this one produced by The Surface Design Studio when we worked with Armatile to create a golf themed design for a hotel bathroom!

Golf themed bathroom floor tiles
Image courtesy of Rayanne Guest House, Belfast

 

2. Get a flat surface

If the floor is not level, then you may need to pour a self-levelling compound which gives you a flat, smooth base for tiling

3. Consider your knees!

Talking from experience, knee pads are a must especially if you’re are laying tiles over a large area.

4. Start off straight

Before you start laying the tiles, fix a straight edge to work from. This will ensure that you won’t run off in the wrong direction and the rest of the tiles will follow on in a straight line. Remove the edge later and you can trim tiles to fill the gap.

5. Tile layout

Think about the layout of the tiles before you start. There are many tile patterns to choose from. Straight lay is the more most common, but why not think about something a bit more interesting such as brick effect, herringbone, diagonal or versailles tile pattern, (a more random layout made up of small and large tiles.) If it is printed tile mural you are installing, then a plan will be provided with numbered references.

tile patterns

6. Spacers

Floor tile spacers are usually 3-5 mm wide. Choose a wider spacer for larger floor tiles, this allows for any movement.

7. Make it Stick

Make sure to choose the right type of adhesive for your floor. A flexible adhesive when tiling onto wooden flooring, or a strong (high bond strength) adhesive for tiling onto concrete or screed floors. Also check the expiry date on your adhesive, I learnt the hard way once when I found all the tiles popped off the next day!

8. Keep it Level

Use a spirit level to check the tiles are level, if they aren’t level lightly tap the tiles with a rubber mallet until they are.

9. Grout Colour

Grout colour will have a big impact on the final look of your tiles. You can go for a matching colour blending into the tile, or make a statement by using a contrasting colour that can draw attention to the layout of the tiles.

We love this bright blue grout against the white tiles, proving coloured grout can give a fresh look to tired tiles.

Coloured grout for tiles

Image courtesy of www.thedesignsheppard.com

10. Finally

Make sure to clean any residue of grout off the face of the tiles. If you opted for a natural stone tile, then it may be a good idea to use a tile sealer afterwards to protect the tiles.

 

Contact The Surface Design Studio on +44(0)1782 512843 to discuss your tiling project, we specialise in bespoke printed floor and wall tiles and we would love to help create your unique tiled space.

 

Posted in Ceramics, custom tiles, Murals, Uncategorized